Authorized Dealer
--------------------------------------------------------
--------------------------------------------------------
--------------------------------------------------------
--------------------------------------------------------
--------------------------------------------------------
--------------------------------------------------------
Mashdetectors is now proud to be selling the powerful gold sucking, gravel moving, bedrock blasting Hydro Force Suction Nozzles! I own and use the 3” Hydro-Force 300 nozzle with my Keene Highbanker equipped with my Honda 6.5 HP motor. I have moved an enormous amout of material with this nozzle and I have made some videos of the event here while using it for Booming and to Power Sluice.
As much material the 3” can move material, I can only assume the 4” Hydro-Force 400 would be an incredible production machine and even using it totally submerged. If you wanted to just use a highbanker with it and not spend the extra money on a dredge, it will dredge just fine as long as you are not to deep in water needing more equipment.
The Hydro force is built in Indiana. The Hydro Force Nozzle mainly for use where water is limited. This nozzle can be used in low amounts of water or completely out of the water and it has a powerful suction force in these conditions. It will literally suck gold off of a dry sidewalk! The Hydro-Force can also be used totaly submerged, just like a dredge or power sluice suction nozzle, with the added ability of a built in blaster jet for flushing gold out of the bedrock.
Hydro-Force Suction Nozzles
This nozzle be used with almost any 2.5” dredge or highbanker, or it can be powered by an inexpensive trash pump. It only requires a single pressure hose, just like a conventional suction nozzle.
The durable stainless steel nozzle tip is coned down to maximize suction and dramatically reduce plug-ups. In dry material, the unique 360 degree high pressure ring forces gravel and gold inward and upward into the suction stream.
Price includes both male and female 1.5” Banjo Quick Connectors for your pressure hose.
Hoses, motor/pump and sluice are not included. A water source is required for your water pump
(5,400 GPH water pump or 2.5” dredge pump required)
$269.95
The little HF200 uses a 2” suction hose and a 1.5” (optional 1.25”) pressure hose for awesome Dry Land Suction Power.
Just like the bigger units, the stainless steel tip on the HF200 in coned down for maximum suction and minimum plug-ups.
Price includes both male and female 1.5” (or 1.25”) Banjo Quick connectors for your pressure hose.
Hoses, motor/pump and sluice are not included. A water source is required for your water pump
(3,600 GPH water pump or 2” dredge pump required).
$249.95
Here by popular demand is the HF400. This nozzle needs a 4 inch suction hose and a 2 inch pressure hose. This is the top of the line and a true work horse.
The HF400 is an awesome dry land production machine and can move a pill of material in very quickly!
Nozzle kit includes both male and female 2” Banjo Quick connectors for your pressure hose.
Hoses, motor/pump and sluice are not included. A water source is required for your water pump .
(11,000 GPH water pump or a 4” dredge pump required).
$349.95
You’ve asked for it, now it’s here, the Hydro-Force 300! The HF300 uses a 3” suction hose and a 2” pressure hose for awesome Dry Land Suction Power. Just like it’s predecessor, the stainless steel tip on the HF300 in coned down for maximum suction and minimum plug-ups.
Price includes both male and female 2” Banjo Quick connectors for your pressure hose.
Hoses, motor/pump and sluice are not included. A water source is required for your water pump
(8,000 GPH water pump or a 3” dredge pump required).
$299.95
Hydro-Force in Action!
Here below is a Video of me using the Hydro Force 300 in Northern California along the Klamath River. I spent 3 weeks making this large monster hole which was 5-6 feet to bedrock. I did the entire excavation with the 3” Hydro-Force suction nozzle and a modified Keene Highbanker with an added extra 3 feet of sluice. And in the second video we were in Oregon power sluicing with the 3" Hydro-Force nozzle.
I used my Honda 6.5 HP dredge motor which was about 80 feet away from the operation. I ran the motor at full trottle to get nice suction from the bottom of the hole. Check it out...
We are not taking orders for the Hydro-Force Nozzels at this time due to not being able to contact the manufacturer. We have had to refund 8 orders in the last 3 months due to them NOT RESPONDING to our orders!